draft: false in the post's frontmatter once approved.Buying a hot tub is a big purchase, and most of what matters isn’t on the glossy spec sheet. After a lot of years on showroom floors and service calls, these are the things I’d want a friend to check before signing anything.
Print this out, or pull it up on your phone at the dealer.
1. Start with how you’ll actually use it
Before you look at a single tub, answer these honestly:
- Who’s getting in, and how often? Two people a few nights a week is a very different tub than a family of six on weekends.
- Why do you want it? Relaxing, sore muscles, social time, kids? This decides whether you care more about jets, seating layout or open space.
- When will you use it? If you want to soak in the middle of winter, insulation and a good cover matter a lot more.
- Where will it go? Measure the spot, the path to get it there (gates, stairs, tight corners) and think about the walk from the door in bad weather.
2. Seating and size: sit in it
Spec sheets list “seats,” but bodies aren’t all the same size.
- Do a dry test. Sit in every seat, shoes off. Check where the jets hit you, whether your feet reach the footwell, and whether you float out of the lounger.
- Ask for a wet test if the dealer offers one. It’s the best way to judge comfort and jet feel.
- Watch the lounger. Some people love them, others float right out. Try it.
- Check the step-in height if anyone in the house has mobility issues.
3. What’s under the cabinet
This is where tubs really differ, and where a good dealer will happily pull a panel off to show you.
- Insulation: Ask what type and where it goes (full foam, perimeter, layered). In cold climates this has a big effect on running cost.
- Equipment access: Can a tech reach the pumps, heater and plumbing without tearing the tub apart? This matters on every future service call.
- Plumbing and fittings: Look for tidy, well-supported lines. Ask how jets and fittings are serviced.
- Base/floor: A sealed base helps keep out moisture and critters.
4. The cover counts more than you’d think
The cover is a big part of how well a tub holds heat.
- Check how thick it is, how it seals around the edge, and whether it tapers so water runs off.
- Lift it. Ask about a cover lifter if it’s heavy or awkward.
- Ask what the cover warranty is. It’s often separate from the tub warranty.
5. Electrical and site prep
Get this sorted before delivery day.
- What power does it need? Many tubs need a dedicated 240V circuit with GFCI protection; some smaller ones are plug-and-play 120V. Ask, and get it in writing.
- Hire a licensed electrician for the install, and check whether your area needs a permit.
- Base: The tub needs a flat, level surface that can handle the weight when it’s full of water and people (a concrete pad, a prepared gravel base, or a properly engineered deck). Ask the dealer what they recommend for that model.
- Access for service: Leave room around the equipment side.
6. Water care system
- What sanitizer does the tub use or recommend (chlorine, bromine, other systems)?
- Does it have an ozone or UV system, and what does maintaining it involve?
- What does the filter setup look like, and how easy is it to pull filters out?
7. Warranty: read the actual document
Don’t just ask “how long is the warranty?” Ask for the written warranty and look at:
- How long each part is covered: shell structure, shell surface, equipment, plumbing, cabinet, cover.
- Parts vs. labor. Some warranties cover parts but only part of the labor, or only for a shorter period.
- Who does the work? Is it the dealer, the factory, or a third party? What happens if the dealer closes?
- Trip charges and what could void the warranty (for example, water chemistry damage or a non-approved install).
8. Questions every dealer should be able to answer
A good dealer won’t mind any of these:
- Who services the tub after the sale, and how quickly can they usually get out?
- Do you keep common parts in stock?
- What’s included in the price: delivery, setup, steps, cover, cover lifter, starter chemicals?
- What does delivery require from me (access, base, electrical)?
- Will you walk me through startup and water care when it’s delivered?
- Can I see the full written warranty before I buy?
- What does this tub typically cost to run in our climate, and what affects that?
If you get vague answers on service and warranty, that tells you something.
9. Don’t let a “today only” price rush you
A good tub from a good dealer will still be a good deal after you sleep on it. Take the spec sheet and warranty home, compare, and come back with questions.
Quick checklist
- Measured the spot and the delivery path
- Sat in every seat (wet test if possible)
- Looked under the cabinet: insulation, equipment access
- Checked the cover fit and the cover warranty
- Confirmed electrical requirements in writing
- Planned the base/pad
- Understood the water care system
- Read the full written warranty (parts, labor, who services it)
- Asked who handles service after the sale
- Confirmed exactly what’s included in the price
Shopping a specific model and want a second opinion? Ask me on the question board.
Still stuck?
Ask about your exact brand and model on the question board.